Novastar H_4xHDBaseT output card

Descripción

4x RJ45 Gigabit Ethernet ports
Support for single link and dual link output modes
This card does not support the fade transition effect.
Supports the transmission distance up to 100m when Cat5e and Cat6 standard
Ethernet cables are used.
.Single link output:
-Four connectors are all available for output.
-Each connector supports the maximum resolution of 2048×1152@60Hz.
-Custom resolution:
Max. width: 2560 pixels (2560×983@60Hz)
Max. height: 2560 pixels (884×2560@60Hz)
-Supports 8-bit RGB 4:4:4/YCbCr 4:4:4/YCbCr 4:2:2 output.
-Supports 10-bit RGB 4:4:4/YCbCr4:4:4 output.
.Dual link input:
-Connector 2 and 4 are available for output.
Connector 1 copies the output on connector 2, and connector 3 copies the output on connector 4.
-Each connector supports the maximum resolution of
4096×2160@30Hz/3840×1080@60Hz.
-Custom resolution:
Max. width: 4096 pixels (4096×1130@60Hz)
Max. height: 4096 pixels (1014×4096@60Hz)
-Supports 8-bit RGB 4:4:4/YCbCr 4:4:4/YCbCr 4:2:2 output.
-Supports 10-bit RGB 4:4:4/YCbCr4:4:4 output.
Status LEDs:
.Green (on), yellow (flashing): The backend device is connected via the
Ethernet cable.
.Green (off), yellow (off): The backend device or Ethernet cable is not connected.
Specifications:
.Weight: 500 g
.Dimensions: 193 mm × 247.12 mm × 21.15 mm
.Power consumption: 32 W